Lexmark & IBM Printer Error Codes – What They Imply & The right way to Repair the Printer Errors

[ad_1]

There’s a entire vary of Lexmark and IBM printer error codes. When you discover it troublesome to diagnose which is which, then here’s a primer that will help you out!

Error code 22: Out of paper

This might point out both a paper jam or a scarcity of paper in your IBM and Lexmark printer. Be sure that there may be adequate paper loaded into the paper tray and in addition examine if there are any sediments collected alongside the trail of paper. Verify to see if the sensor flag for enter is damaged or not and in addition make sure the system boards and cable 2 is just not faulty.

Error code 31: Paper change wanted

Which means that your Lexmark and IBM printer has a special paper dimension configuration from what’s wanted within the software program. Be sure that to alter the paper settings to regulate the dimensions. Additionally examine the printer software program setup for any points in addition to the system board for any fault.

Error codes 41 and 43: Font associated

These error codes normally point out that the actual font wanted is just not out there within the Lexmark and IBM printer. This might sign a defective font card or a fault contained in the system board. It may additionally imply that the font card had been eliminated whereas the facility was switched on. If the font card is flawed be certain to get a brand new one.

Error code 54: serial error

This error code signifies that the settings for the serial configuration between your pc and your printer are completely different. Be sure that the communication cable, I/O cable and system boards aren’t broken or improperly related.

Error code 89: Overloaded output tray

This error code implies that your output tray is totally full. Be sure that to take out paper from the output tray. You additionally have to examine the operability of the respective flags. You can too attempt changing the picture sensor for the cardboard.

Error code 9920: Fuser not as per temperature

For this error code it’s worthwhile to monitor the resistance on the fuser in addition to on the thermo fuse, lamp and the thermistor. There may be an issue with low voltage. Verify if there may be continuity within the cable 1 of the system in addition to inside the facility cable contained in the fuser.

Error code 970: improper turning on the fan

Which means that the fan contained in the Lexmark and IBM printer is just not turning on. You might attempt to reseat the cables that lie between the system board and the fan. Additionally attempt resetting the printer.

Error code 24: Incorrect handbook feed

This error code may come up resulting from a wide range of causes. If you’re attempting to place the paper inside handbook feed on the identical time the printer is taking off paper from the paper tray then the error may happen. Be sure that to not put paper inside handbook feed till and until it has been explicitly requested.

[ad_2]

Source by James Kara Murat.